What are the cleaning methods of stainless steel plates
Date:2022-10-26View:345Tags:
Stainless steel sheets are easy to clean, and washing with soap or mild detergent and warm water, followed by rinsing with clean water is usually sufficient for household and construction equipment. If the stainless steel becomes very dirty, with signs of surface discoloration, such as possibly during periods of neglect or misuse, other cleaning methods can be used, as described below
First of all, if you are cleaning light pollution daily, you can use soap, detergent or diluted (1%) ammonia solution in warm water. Apply with a clean sponge, soft cloth or soft fiber brush, then rinse with clean water to dry.
If there are fingerprints on the surface of the stainless steel plate, you can use detergent and warm water, or a hydrocarbon solvent; when there are traces of oil and grease on the surface, you can use a hydrocarbon solvent (methylated spirit, isopropyl alcohol or acetone); when there are stubborn spots on the surface , stains and light discoloration, watermarks and light rust staining, mild, scratch-free creams and polishes can be used. Apply with a soft cloth or sponge and rinse off with clean water and dry residue.
In the case of localized rust from carbon steel contamination, a proprietary gel or a 10% phosphoric acid solution (followed by an ammonia rinse) or an oxalic acid solution (followed by a water rinse) can be used; it can be used when there is burning food or carbon deposits on the surface Preheat soak in hot water with detergent or ammonia solution, if needed, remove deposits with nylon brush and fine scrubbing powder. Repeat if necessary, and perform regular cleaning; when there are tea stains and oily deposits on the surface, use a hot solution of baking soda (sodium bicarbonate) to clean.
If there is hard scale and mortar or cement splashing on the stainless steel surface, it can be neutralized with a mild dilute ammonia solution, rinsed with clean water and dried, or soaked in a 25% vinegar solution, and used a nylon brush to remove the deposits; when When heated or heavily discolored, treat with a non-scratching cream or polish; when the surface has accumulated a lot of deposits, use a fine abrasive paste for auto body repair, cut clean and remove all paste and dry. When there is paint or graffiti on the stainless steel surface, use a proprietary alkaline or solvent-based paint stripper, depending on the type of paint, with soft nylon or bristles on the patterned surface.
