Centerway Steel Co., Ltd
Centerway Steel Co., Ltd
Centerway Steel Co., Ltd
carbon steel plate,steel coil,stainless steel plate,china export service provider.
carbon steel plate,steel coil,stainless steel plate,china export service provider.
Alloy 410S (UNS S41008) is a low carbon, non–hardening modification of Alloy 410 (UNS S41000) the general purpose 12% chromium martensitic stainless steel. The low carbon and a small alloy addition minimize austenite formation at high temperatures which restricts the alloys ability to harden. 410S remains soft and ductile even when rapidly cooled from above the critical temperature. This non-hardening characteristic helps prevent cracking when the alloy is exposed to high temperatures or welded. 410S is completely ferritic in the annealed condition. It exhibits adequate corrosion resistance similar to 410 and good oxidation resistance.
|
SURFACE |
CHARACTERISTIC |
SUMMARY OF MANUFACTURING METHOD |
APPLICATION |
|
NO.1 |
Silvery white |
Hot rolled to specified thickness |
Do not need to have a glossy surface use |
|
lackluster |
|||
|
NO.2D |
Silvery white |
After cold rolling, heat treatment and pickling are carried out |
General material, deep material |
|
NO.2B |
Gloss is stronger than No.2D |
After No.2D treatment, the final light cold rolling is carried out through the polishing roller |
The general material |
|
BA |
As bright as a sixpence |
No standard, but usually a bright annealed surface with high reflectivity. |
Building materials, kitchen utensils |
|
NO.3 |
Rough lapping |
Grind with 100~200# (unit) strop tape |
Building materials, kitchen utensils |
|
NO.4 |
Intermediate grinding |
Polished surface obtained by grinding with 150~180# strop abrasive tape |
Building materials, kitchen utensils |
|
NO.240 |
Fine lapping |
Grinding with 240# strop abrasive tape |
kitchenware |
|
NO.320 |
Very fine grinding |
Grinding was carried out with 320# strop abrasive tape |
kitchenware |
|
NO.400 |
The luster is close to BA |
Use 400# polishing wheel to grind |
General timber, building timber, kitchen appliances |
|
HL |
Hairline grinding |
Suitable particle material for hair stripe grinding (150~240#) with many grains |
Building, construction material |
|
NO.7 |
It's close to mirror grinding |
Use a 600# rotary polishing wheel to grind |
For art or decoration |
|
NO.8 |
Mirror ultrafinish |
The mirror is ground with a polishing wheel |
Reflector, for decoration |
|
PRODUCTINFORMATION |
PARAMETER |
PRODUCTINFORMATION |
PARAMETER |
|
Product Name: |
Stainless steel plate |
Standard: |
ASTM，AISI，JIS，GB， DIN，EN |
|
Thickness: |
0.3-200mm |
Surface: |
BA，2B，NO.1，NO.4，4K，HL，8K |
|
Length: |
2000mm, 2438mm, 3000mm, 5800mm, 6000mm,12000mm， etc |
Certification: |
ISO, SGS，BV |
|
Width: |
40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Technique: |
Cold Rolled Hot Rolled |
|
Grade（ASTM UNS） |
304、304L、321、316、316L、317L、347H、309S、310S、 904L、S32205、2507、254SMOS、 32760、S31703、S31603、316Ti、S31635、S31254、 N08926、2205、S32205、S31008、S30908、S32750、S32760、630etc |
Price Term: |
CIF CFR FOB EX-WORK |
|
Grade （EN） |
1.4301，1.4307，1.4541，1.4401，1.4404，1.4571，1.4438，1.4539，1.4547，1.4529，1.4410，1.4501，1.4462，1.4845，1.4542，,etc |
Payment Terms |
T/T L/C and Western Union etc |
|
Packaging & Delivery |
|||
|
in bundle,plastic bags,thin film,wooden pallet,standard seaworthy export packing or as customer demands |
|||
|
20ft GP:5898mm(Length)x2352mm(Width)x2393mm(High) 24-26CBM40ft GP:12032mm(Length)x2352mm(Width)x2393mm(High) 54CBM40ft HC:12032mm(Length)x2352mm(Width)x2698mm(High) 68CBM |
|||
Equivalent Material
|
Grade |
UNS |
AISI |
BS |
DIN |
EN |
JIS |
GB |
|
SS 410 |
S41000 |
410 |
410S21 |
1.4006 |
X12Cr13 |
SUS410 |
1Cr13 |
|
SS 410S |
S41008 |
410S |
|
1.4000 |
|
|
00Cr12 |
Chemical Composition
|
Grade |
Cr |
Mn |
Si |
Ni |
C |
P |
S |
Fe |
|
SS 410 |
11.50 – 13.50 |
≤1.50 |
≤1.00 |
≤ 0.75 |
0.08 – 0.15 |
0.04 |
0.02 |
Balance |
|
SS 410S |
11.50–13.50 |
1.00 max |
1.00 |
0.20-0.55 |
0.08 |
0.040 |
0.030 |
Balance |
Mechanical Properties
|
Grades |
Tensile Strength (Mpa) |
0.2% Offset Yield Strength (Mpa) |
Elongation, % in 2″ (51 mm) |
Hardening Response HRC |
|
SS 410 / 410S |
450– 510 |
205 – 290 |
20 – 34 |
38-45 |
HEAT TREATMENT
The alloy can not be hardened by heat treatment. It is annealed between 1600 – 1650°F (871 – 899°C), and then air cooled to relieve cold working stresses. 410S should not be exposed to temperatures above 2000°F (1093°C), due to embrittlement. If large grains are found after annealing mildly cold-worked material, the annealing temperature should be decreased to 1200 – 1350°F (649 – 732°C).
WELDING
410S is generally considered to be weldable by the common fusion and resistance techniques. Special attention should be given to avoid brittle weld fractures during fabrication; this includes minimizing discontinuities, maintaining low weld heat input, and occasionally warming the part somewhat before forming. 410S is generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade 409. A major difference can be attributed to the addition of alloy, to control hardening which results in the need for higher heat input during welding.
