ASTM A240 specification covers stainless steel plates, sheets and strips for pressure vessels and general applications. This specification covers chemical composition and mechanical properties for various grades of ferritic, austenitic, martensitic, duplex, super duplex and high moly stainless steel alloys.

More Detail

More Detail

The GB/T1591 Q345A is a steel model compared to the Q345C, Q345B steel. Low-temperature impact test has a low test temperature and good performance. Containing harmful substances P, S is lower than Q345A, B. GB/T1591 Q390A steel is high strength low alloy steel material. "Q" is the first letter of Chinese Pinyin: "qu fu dian", that means Yield Point, "390" is the minimum value of yield strength 390 MPa for steel thickness ≤16mm. "A" is the quality level. According to GB/T 1591–2008, Q390 material has 5 quality grades: Q390A, Q390B, Q390C, Q390D and Q390E.

More Detail

GB/T 700 is divided into 4 quality grades: Q235A, Q235B, Q235C and Q235D; Density of this steel is 7.85 g/cm3, tensile strength is 370-500 MPa; yield strength is 235 MPa (data are for steel bar or steel plate diameter ≤ 16mm). Since it’s mild steel, it is used directly without heat treatment

More Detail

Steel Plate DIN 17102 Grade StE315 EStE285 TStE315 WStE315 StE355 StE380 StE420 StE460 WStE500 in Large Stock.

More Detail

This Standard applies to steel sections (including wide flange beams), steel bars, wire rod, flat products(strip, plate, wide flats) seamless and welded, square and rectangular hollow sections, forgings and semi-finished products in the general structural steels nemed in Tables 1 to 3 which are delivered in the hot formed or normalized condition after production.

More Detail

JIS G3106 specification is for hot rolled carbon steel platefor welded structrual purposes, steel grades include: SM400A/B/C, SM490A/B/C, SM490YA/YB, SM520B/C,SM570.

More Detail

JIS G3101 SS400 is one of the most common carbon structural steel grade, other grades of JIS G3101 are ss330, ss490, ss540. Related product type includes steel plate, steel sheet, steel sections, steel pipes, etc.

More Detail

Specification: Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm

More Detail

EN10025-4 hot rolled structural steel plates are thermomechanical rolled weldable fine grain structural steels. Specification: Thickness 8mm-300mm, Width: 1500-4020mm, Length: 3000-27000mm

More Detail

EN 10025-3 is the European Standard for hot rolled weldable fine grain structural steels in the normalized or normalized rolled

More Detail

EN 10025 S235JR is a non-alloy, low carbon, manganese-containing structural steel commonly supplied in an untreated or normalised condition. It is available in plate and structural steel profiles.

More Detail

A633 is a normalized high-strength low-alloy structural steel plate. It is suited for service at low ambient temperatures of —50°F or higher where notch toughness better than expected is desired.

More Detail

ASME SA588 steel standard covers the SA588 Grade A steel, SA588 Grade B and SA588 Grade K high-strength low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction but intended primarily for use in welded bridges and buildings where savings in weight or added durability are important.

More Detail

Production Size: Thickness: 4mm- 400mm; Width: 1000mm- 4000mm; Length: 4000mm- 12000mm. Production ability:10000 Tons Per Month. Production Way: Hot Rolled

More Detail