The selection of
stainless steel plates should consider the operating conditions, such as manual operation or automatic operation, the performance and type of the hot press, and the quality requirements for the pressed material such as hardness and gloss. Economic calculations should also be considered. Each time a newly polished steel plate is required to be able to produce a lower quality decorative plate.
In addition, when choosing the most reasonable thickness of the steel plate, its service time, quality, and stiffness should be considered, and at the same time, the strength requirements of the plate when it is compressed; thermal conductivity; pressure distribution, and the format specification of the pressure plate.
If the thickness of the steel plate is not enough and it is easy to bend, it will definitely affect the production of decorative panels. If the thickness is too large and the steel plate is too heavy, it will not only increase the cost of the steel plate, but also bring unnecessary difficulties to the operation. At the same time, the margin should be left when the stainless steel plate is processed or used. The thickness of the copper plate is not absolutely consistent, but the thickness of the same steel plate should be as consistent as possible. Generally, the thickness tolerance of the medium-sized sawing plate is 0.05-0.15mm. If the requirements are too strict, the grinding cost will also increase accordingly. Generally, it is a steel plate with big tensile strength and big hardness. The greater your resistance to mechanical damage, the longer the durability people, but the cost for grinding and processing is also higher.
