ASTM A514 steel plate, also known as T-1 steel plate, is a popular grade of quenched and tempered (Q&T) steel that offers high strength, weldability and machinability. Due to these properties, A514 is typically used in applications where wear resistance and the ability to withstand high impact are important. A514 is heat-treated through quenching and tempering, a two-step heat treatment process that alters the grain structure of the material to increase strength, hardness and toughness.

More Detail

A656 is the standard specification for hot-rolled structural steel, high-strength low alloy plate with improved formability. Lists two possible chemical variations for steels (grades 50, 60, 70, 80, and 100). Grades 80 and 100 are the highest volumes. More demanding property and chemistry requirements than A572.

More Detail

A656 is the standard specification for hot-rolled structural steel, high-strength low alloy plate with improved formability. Lists two possible chemical variations for steels (grades 50, 60, 70, 80, and 100). Grades 80 and 100 are the highest volumes. More demanding property and chemistry requirements than A572.

More Detail

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates.ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade:ASTM A633Grade A,C,D,E(A633GRA,A633GRC,A633GRD,A633GRE)

More Detail

ASTM A588 Grade A and A588 Grade B are highly resistant to atmospheric corrosion, superior corrosion resistance over regular carbon steel as a result of the development of a protective oxide film on the metals surface which slows down further corrosion. Both are high-strength low-alloy weathering steels which exhibits 50,000 minimum yield strength characteristic allows cost reduction through the ability to design lighter sections into structures.

More Detail

Steel Standard:ASTM A572/A572M Rolling Type:Low alloy steel plate,HSLA steel plate Thickness:6mm-450mm Width:1500mm-4200mm

More Detail

The ASTM A514 specification is the Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding used in applications where Yield Strengths of ≥ 100 ksi are required for plates up to 2-1/2" thick, inclusive. Plates > 2-1/2" and ≤ 6" in thickness have a minimum Yield Strength requirement of 90 ksi. Each grade has different chemistry requirements. Typical applications include transport trailers, construction equipment, crane booms, mobile man-lifts, agricultural equipment, heavy vehicle frames and chassis, and welded bridge structural members.

More Detail

NM400 is one kind of Chinese wear/abrasion resistant steel plates, which is well received in middle east and Africa. An NM400 wear-resistant steel was hot rolled and then the plates were heat-treated by direct quenching and tempering and reheat quenching and tempering techniques, respectively. The impact test was carried out with an instrumented impact tester.

More Detail

EN10025 E360 steel plate/sheet, under EN standard, we can regard E360 steel plate/sheet for general Construction steels.EN10025 E360 steel plate/sheet is for general Construction steels.The followings are the chemical composition and the mechanical properties of EN E360 steel.E360 steel is according to EN10025 standard and it is equivalent to EN:Fe690-2,DIN17100:St70-2,NFA: A70-2 and UNI7070:Fe690 steel grades.

More Detail

Thickness: 8mm-100mm Length: 3000mm-18000mm or as required Width: 1500mm-3500mm Supplementary Technology: Heat Treatment: Normalized, quenched, tempering, normalized, HIC, SSC, SPWHT, Third Party Test. Surface: Coated or Shot Blasting and Painting. Steel Grade: 161-360A/B, 161-430A/B, 223-490A/B, 224-460A/B, 224–490A/B, 225-490A/B

More Detail

Thickness:8mm-700mm Length: 3000mm-27000mm or as required Width: 1500mm-4020mm Surface: Coated or Shot Blasting and Painting. Delivery state: Hot Rolled, Cold Rolled Steel Grade: 15Mo3, 13CrMo4-4, 17Mn4, 10CrMo9-10, 19Mn6, HII, HI

More Detail

Thickness: 5mm-100mm Length: 4000mm- 12000mm Width: 1000mm- 4000mm Surface: Coated or Shot Blasting and Painting. Delivery state: Hot Rolled, Cold Rolled Steel Grade: Grade A, Grade B, Grade C

More Detail

Thickness:6mm-300mm Length: 3000mm-15000mm Width: 1500mm-4050mm Application: Steel boiler plate, Pressure vessel plate Surface: Coated or Shot Blasting and Painting. Delivery state: Hot Rolled, Cold Rolled Steel Grade: Class 1, Class 2, Class 3

More Detail

Thickness:5-100mm Length: 2m,2.44m,3m,6m,8m,12m or coil Width: 10-3500mm Surface: Black painted, PE coated, Galvanized, color coated, anti rust varnished, anti rust oiled, checkered, etc. Delivery state: Hot Rolled, Cold Rolled Steel Grade: Grade 60, Grade 65, Grade 70

More Detail

Thickness: 5-100mm Length: 1220-4200mm Width: 5000-18000mm Application: welded boiler steel plate, pressure vessel plate Supplementary Technology: UT , AR( TMCP, N, Q+T, Z Direction Test(Z15,Z25,Z35), Charpy V-Notch Impact Test, HIC test, NDT ,PWHT, NACE0175, The Third Party Test (Such as SGS Test). Surface: Coated or Shot Blasting and Painting Delivery state: Hot Rolled, Cold Rolled Steel Grade: Grade A, Grade B

More Detail